Description

• Strips round Cat5E, Cat6 UTP/STP & flat cables
• Compact Size
• Adjustable Screw for varied cable diameters to avoid scoring interior conductor insulation.
• Strips Diameter: 4mm – 7mm
• Cut Diameter: ≤9mm

Specifications

• Connector Interface  :  2X RJ45 jack (PSE test jack, PD test jack)
• Step Button  :  For selecting specific data to display. Default display for voltage value.
• Display  :  *4 LEDs indicate IEEE 802.3af or 802.3at standard. *Dual 7-digit LEDs indicate power source either End (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both. * 2 Yellow LEDs indicate reversed polarity for power type. * Display in rotation between voltage (U) (Volts), current (A) (mA or Amp) and power (P) (Watts).
• Voltage Range  :  Max 30V to 60V for mode A and Mode B. (1% accuracy)
• Max Current  :  750mA for Mode A and Mode B, total 1.5 Amps.
• Gigabit(PoE+)Ethernet Transformer  :  Support 10/100 and Gigabit data rates, isolated data passes Through for all 4 pairs. With 1.1 Amp tolerance continuous for each pair.
• Connector Interface  :  2X RJ45 jack (PSE test jack, PD test jack)
• Standard compliant  :  IEEE 802.3af (PoE), 802.3at (PoE+), and 802.3bt (PoE++) type3.
• Testing  :  One–ended testing–PSE. In-line testing – between PSE and PD.
• Tester load loss  :  0.75W
• Operating Temp. Storage Temp.  :  32°F to 122°F (0°C to 50°C). -40°F to 131°F (-20°C to 55°C).
• Operating Humidity  :  MAX 90% non – condensing.
• Size  :  99 X 36 X 26mm / 3.9 X 1.4 X 1 inch. 0.1lb / 1.6oz.

Note: Cable dissipation (Voltage drop), over a 100m (328ft) length, Cat 5 or higher (12.5Ω)